/zed/.config/zed/conversations/

.DS_Store

\.gitignore

\.git

\README.md

2024/12/30 (09:30:44) | ===> btop++ v.1.4.0

2024/12/30 (09:30:44) | WARNING: Failed to set locale UTF-8 continuing anyway.

window-padding-x = 6

window-padding-balance = true

window-save-state = always

# Icon

macos-icon-frame = plastic

auto-update-channel = stable

click-repeat-interval = 500

command = /opt/homebrew/bin/nu

# The font families to use.

# 

# You can generate the list of valid values using the CLI:

# 

#     ghostty +list-fonts

# 

# This configuration can be repeated multiple times to specify preferred

# fallback fonts when the requested codepoint is not available in the primary

# font. This is particularly useful for multiple languages, symbolic fonts,

# etc.

# 

# Notes on emoji specifically: On macOS, Ghostty by default will always use

# Apple Color Emoji and on Linux will always use Noto Emoji. You can

# override this behavior by specifying a font family here that contains

# emoji glyphs.

# 

# The specific styles (bold, italic, bold italic) do not need to be

# explicitly set. If a style is not set, then the regular style (font-family)

# will be searched for stylistic variants. If a stylistic variant is not

# found, Ghostty will use the regular style. This prevents falling back to a

# different font family just to get a style such as bold. This also applies

# if you explicitly specify a font family for a style. For example, if you

# set `font-family-bold = FooBar` and "FooBar" cannot be found, Ghostty will

# use whatever font is set for `font-family` for the bold style.

# 

# Finally, some styles may be synthesized if they are not supported.

# For example, if a font does not have an italic style and no alternative

# italic font is specified, Ghostty will synthesize an italic style by

# applying a slant to the regular style. If you want to disable these

# synthesized styles then you can use the `font-style` configurations

# as documented below.

# 

# You can disable styles completely by using the `font-style` set of

# configurations. See the documentation for `font-style` for more information.

# 

# If you want to overwrite a previous set value rather than append a fallback,

# specify the value as `""` (empty string) to reset the list and then set the

# new values. For example:

# 

#     font-family = ""

#     font-family = "My Favorite Font"

# 

# Setting any of these as CLI arguments will automatically clear the

# values set in configuration files so you don't need to specify

# `--font-family=""` before setting a new value. You only need to specify

# this within config files if you want to clear previously set values in

# configuration files or on the CLI if you want to clear values set on the

# CLI.

# 

# Changing this configuration at runtime will only affect new terminals, i.e.

# new windows, tabs, etc.

font-family = "CommitMono Nerd Font"

font-family-bold = 

font-family-italic = 

font-family-bold-italic = 

keybind = super+alt+j=toggle_quick_terminal

# The named font style to use for each of the requested terminal font styles.

# This looks up the style based on the font style string advertised by the

# font itself. For example, "Iosevka Heavy" has a style of "Heavy".

# 

# You can also use these fields to completely disable a font style. If you set

# the value of the configuration below to literal `false` then that font style

# will be disabled. If the running program in the terminal requests a disabled

# font style, the regular font style will be used instead.

# 

# These are only valid if its corresponding font-family is also specified. If

# no font-family is specified, then the font-style is ignored unless you're

# disabling the font style.

font-style = default

font-style-bold = default

font-style-italic = default

font-style-bold-italic = default

# Control whether Ghostty should synthesize a style if the requested style is

# not available in the specified font-family.

# 

# Ghostty can synthesize bold, italic, and bold italic styles if the font

# does not have a specific style. For bold, this is done by drawing an

# outline around the glyph of varying thickness. For italic, this is done by

# applying a slant to the glyph. For bold italic, both of these are applied.

# 

# Synthetic styles are not perfect and will generally not look as good

# as a font that has the style natively. However, they are useful to

# provide styled text when the font does not have the style.

# 

# Set this to "false" or "true" to disable or enable synthetic styles

# completely. You can disable specific styles using "no-bold", "no-italic",

# and "no-bold-italic". You can disable multiple styles by separating them

# with a comma. For example, "no-bold,no-italic".

# 

# Available style keys are: `bold`, `italic`, `bold-italic`.

# 

# If synthetic styles are disabled, then the regular style will be used

# instead if the requested style is not available. If the font has the

# requested style, then the font will be used as-is since the style is

# not synthetic.

# 

# Warning: An easy mistake is to disable `bold` or `italic` but not

# `bold-italic`. Disabling only `bold` or `italic` will NOT disable either

# in the `bold-italic` style. If you want to disable `bold-italic`, you must

# explicitly disable it. You cannot partially disable `bold-italic`.

# 

# By default, synthetic styles are enabled.

font-synthetic-style = bold,italic,bold-italic

# Apply a font feature. This can be repeated multiple times to enable multiple

# font features. You can NOT set multiple font features with a single value

# (yet).

# 

# The font feature will apply to all fonts rendered by Ghostty. A future

# enhancement will allow targeting specific faces.

# 

# A valid value is the name of a feature. Prefix the feature with a `-` to

# explicitly disable it. Example: `ss20` or `-ss20`.

# 

# To disable programming ligatures, use `-calt` since this is the typical

# feature name for programming ligatures. To look into what font features

# your font has and what they do, use a font inspection tool such as

# [fontdrop.info](https://fontdrop.info).

# 

# To generally disable most ligatures, use `-calt`, `-liga`, and `-dlig` (as

# separate repetitive entries in your config).

font-feature = 

# Font size in points. This value can be a non-integer and the nearest integer

# pixel size will be selected. If you have a high dpi display where 1pt = 2px

# then you can get an odd numbered pixel size by specifying a half point.

# 

# For example, 13.5pt @ 2px/pt = 27px

# 

# Changing this configuration at runtime will only affect new terminals,

# i.e. new windows, tabs, etc. Note that you may still not see the change

# depending on your `window-inherit-font-size` setting. If that setting is

# true, only the first window will be affected by this change since all

# subsequent windows will inherit the font size of the previous window.

font-size = 13

# A repeatable configuration to set one or more font variations values for

# a variable font. A variable font is a single font, usually with a filename

# ending in `-VF.ttf` or `-VF.otf` that contains one or more configurable axes

# for things such as weight, slant, etc. Not all fonts support variations;

# only fonts that explicitly state they are variable fonts will work.

# 

# The format of this is `id=value` where `id` is the axis identifier. An axis

# identifier is always a 4 character string, such as `wght`. To get the list

# of supported axes, look at your font documentation or use a font inspection

# tool.

# 

# Invalid ids and values are usually ignored. For example, if a font only

# supports weights from 100 to 700, setting `wght=800` will do nothing (it

# will not be clamped to 700). You must consult your font's documentation to

# see what values are supported.

# 

# Common axes are: `wght` (weight), `slnt` (slant), `ital` (italic), `opsz`

# (optical size), `wdth` (width), `GRAD` (gradient), etc.

font-variation = 

font-variation-bold = 

font-variation-italic = 

font-variation-bold-italic = 

# Force one or a range of Unicode codepoints to map to a specific named font.

# This is useful if you want to support special symbols or if you want to use

# specific glyphs that render better for your specific font.

# 

# The syntax is `codepoint=fontname` where `codepoint` is either a single

# codepoint or a range. Codepoints must be specified as full Unicode

# hex values, such as `U+ABCD`. Codepoints ranges are specified as

# `U+ABCD-U+DEFG`. You can specify multiple ranges for the same font separated

# by commas, such as `U+ABCD-U+DEFG,U+1234-U+5678=fontname`. The font name is

# the same value as you would use for `font-family`.

# 

# This configuration can be repeated multiple times to specify multiple

# codepoint mappings.

# 

# Changing this configuration at runtime will only affect new terminals,

# i.e. new windows, tabs, etc.

font-codepoint-map = 

# Draw fonts with a thicker stroke, if supported. This is only supported

# currently on macOS.

font-thicken = false

# All of the configurations behavior adjust various metrics determined by the

# font. The values can be integers (1, -1, etc.) or a percentage (20%, -15%,

# etc.). In each case, the values represent the amount to change the original

# value.

# 

# For example, a value of `1` increases the value by 1; it does not set it to

# literally 1. A value of `20%` increases the value by 20%. And so on.

# 

# There is little to no validation on these values so the wrong values (i.e.

# `-100%`) can cause the terminal to be unusable. Use with caution and reason.

# 

# Some values are clamped to minimum or maximum values. This can make it

# appear that certain values are ignored. For example, many `*-thickness`

# adjustments cannot go below 1px.

# 

# `adjust-cell-height` has some additional behaviors to describe:

# 

#   * The font will be centered vertically in the cell.

# 

#   * The cursor will remain the same size as the font, but may be

#     adjusted separately with `adjust-cursor-height`.

# 

#   * Powerline glyphs will be adjusted along with the cell height so

#     that things like status lines continue to look aligned.

adjust-cell-width = 

adjust-cell-height = 

# Distance in pixels from the bottom of the cell to the text baseline.

# Increase to move baseline UP, decrease to move baseline DOWN.

adjust-font-baseline = 

# Distance in pixels from the top of the cell to the top of the underline.

# Increase to move underline DOWN, decrease to move underline UP.

adjust-underline-position = 

# Thickness in pixels of the underline.

adjust-underline-thickness = 

# Distance in pixels from the top of the cell to the top of the strikethrough.

# Increase to move strikethrough DOWN, decrease to move underline UP.

adjust-strikethrough-position = 

# Thickness in pixels of the strikethrough.

adjust-strikethrough-thickness = 

# Distance in pixels from the top of the cell to the top of the overline.

# Increase to move overline DOWN, decrease to move underline UP.

adjust-overline-position = 

# Thickness in pixels of the overline.

adjust-overline-thickness = 

# Thickness in pixels of the bar cursor and outlined rect cursor.

adjust-cursor-thickness = 

# Height in pixels of the cursor. Currently applies to all cursor types:

# bar, rect, and outlined rect.

adjust-cursor-height = 

# Thickness in pixels of box drawing characters.

adjust-box-thickness = 

# The method to use for calculating the cell width of a grapheme cluster.

# The default value is `unicode` which uses the Unicode standard to determine

# grapheme width. This results in correct grapheme width but may result in

# cursor-desync issues with some programs (such as shells) that may use a

# legacy method such as `wcswidth`.

# 

# Valid values are:

# 

# * `legacy` - Use a legacy method to determine grapheme width, such as

#   wcswidth This maximizes compatibility with legacy programs but may result

#   in incorrect grapheme width for certain graphemes such as skin-tone

#   emoji, non-English characters, etc.

# 

#   This is called "legacy" and not something more specific because the

#   behavior is undefined and we want to retain the ability to modify it.

#   For example, we may or may not use libc `wcswidth` now or in the future.

# 

# * `unicode` - Use the Unicode standard to determine grapheme width.

# 

# If a running program explicitly enables terminal mode 2027, then `unicode`

# width will be forced regardless of this configuration. When mode 2027 is

# reset, this configuration will be used again.

# 

# This configuration can be changed at runtime but will not affect existing

# terminals. Only new terminals will use the new configuration.

grapheme-width-method = unicode

# FreeType load flags to enable. The format of this is a list of flags to

# enable separated by commas. If you prefix a flag with `no-` then it is

# disabled. If you omit a flag, it's default value is used, so you must

# explicitly disable flags you don't want. You can also use `true` or `false`

# to turn all flags on or off.

# 

# This configuration only applies to Ghostty builds that use FreeType.

# This is usually the case only for Linux builds. macOS uses CoreText

# and does not have an equivalent configuration.

# 

# Available flags:

# 

#   * `hinting` - Enable or disable hinting, enabled by default.

#   * `force-autohint` - Use the freetype auto-hinter rather than the

#     font's native hinter. Enabled by default.

#   * `monochrome` - Instructs renderer to use 1-bit monochrome

#     rendering. This option doesn't impact the hinter.

#     Enabled by default.

#   * `autohint` - Use the freetype auto-hinter. Enabled by default.

# 

# Example: `hinting`, `no-hinting`, `force-autohint`, `no-force-autohint`

freetype-load-flags = hinting,force-autohint,monochrome,autohint

# A theme to use. This can be a built-in theme name, a custom theme

# name, or an absolute path to a custom theme file. Ghostty also supports

# specifying a different theme to use for light and dark mode. Each

# option is documented below.

# 

# If the theme is an absolute pathname, Ghostty will attempt to load that

# file as a theme. If that file does not exist or is inaccessible, an error

# will be logged and no other directories will be searched.

# 

# If the theme is not an absolute pathname, two different directories will be

# searched for a file name that matches the theme. This is case sensitive on

# systems with case-sensitive filesystems. It is an error for a theme name to

# include path separators unless it is an absolute pathname.

# 

# The first directory is the `themes` subdirectory of your Ghostty

# configuration directory. This is `$XDG_CONFIG_DIR/ghostty/themes` or

# `~/.config/ghostty/themes`.

# 

# The second directory is the `themes` subdirectory of the Ghostty resources

# directory. Ghostty ships with a multitude of themes that will be installed

# into this directory. On macOS, this list is in the `Ghostty.app/Contents/

# Resources/ghostty/themes` directory. On Linux, this list is in the `share/

# ghostty/themes` directory (wherever you installed the Ghostty "share"

# directory.

# 

# To see a list of available themes, run `ghostty +list-themes`.

# 

# A theme file is simply another Ghostty configuration file. They share

# the same syntax and same configuration options. A theme can set any valid

# configuration option so please do not use a theme file from an untrusted

# source. The built-in themes are audited to only set safe configuration

# options.

# 

# Some options cannot be set within theme files. The reason these are not

# supported should be self-evident. A theme file cannot set `theme` or

# `config-file`. At the time of writing this, Ghostty will not show any

# warnings or errors if you set these options in a theme file but they will

# be silently ignored.

# 

# Any additional colors specified via background, foreground, palette, etc.

# will override the colors specified in the theme.

# 

# To specify a different theme for light and dark mode, use the following

# syntax: `light:theme-name,dark:theme-name`. For example:

# `light:rose-pine-dawn,dark:rose-pine`. Whitespace around all values are

# trimmed and order of light and dark does not matter. Both light and dark

# must be specified in this form. In this form, the theme used will be

# based on the current desktop environment theme.

# 

# There are some known bugs with light/dark mode theming. These will

# be fixed in a future update:

# 

#   - macOS: titlebar tabs style is not updated when switching themes.

# 

theme = 

# Background color for the window.

background = #282c34

# Foreground color for the window.

foreground = #ffffff

# The foreground and background color for selection. If this is not set, then

# the selection color is just the inverted window background and foreground

# (note: not to be confused with the cell bg/fg).

selection-foreground = 

selection-background = 

# Swap the foreground and background colors of cells for selection. This

# option overrides the `selection-foreground` and `selection-background`

# options.

# 

# If you select across cells with differing foregrounds and backgrounds, the

# selection color will vary across the selection.

selection-invert-fg-bg = false

# The minimum contrast ratio between the foreground and background colors.

# The contrast ratio is a value between 1 and 21. A value of 1 allows for no

# contrast (i.e. black on black). This value is the contrast ratio as defined

# by the [WCAG 2.0 specification](https://www.w3.org/TR/WCAG20/).

# 

# If you want to avoid invisible text (same color as background), a value of

# 1.1 is a good value. If you want to avoid text that is difficult to read, a

# value of 3 or higher is a good value. The higher the value, the more likely

# that text will become black or white.

# 

# This value does not apply to Emoji or images.

minimum-contrast = 1

# Color palette for the 256 color form that many terminal applications use.

# The syntax of this configuration is `N=HEXCODE` where `N` is 0 to 255 (for

# the 256 colors in the terminal color table) and `HEXCODE` is a typical RGB

# color code such as `#AABBCC`.

# 

# For definitions on all the codes [see this cheat

# sheet](https://www.ditig.com/256-colors-cheat-sheet).

palette = 0=#1d1f21

palette = 1=#cc6666

palette = 2=#b5bd68

palette = 3=#f0c674

palette = 4=#81a2be

palette = 5=#b294bb

palette = 6=#8abeb7

palette = 7=#c5c8c6

palette = 8=#666666

palette = 9=#d54e53

palette = 10=#b9ca4a

palette = 11=#e7c547

palette = 12=#7aa6da

palette = 13=#c397d8

palette = 14=#70c0b1

palette = 15=#eaeaea

palette = 16=#000000

palette = 17=#00005f

palette = 18=#000087

palette = 19=#0000af

palette = 20=#0000d7

palette = 21=#0000ff

palette = 22=#005f00

palette = 23=#005f5f

palette = 24=#005f87

palette = 25=#005faf

palette = 26=#005fd7

palette = 27=#005fff

palette = 28=#008700

palette = 29=#00875f

palette = 30=#008787

palette = 31=#0087af

palette = 32=#0087d7

palette = 33=#0087ff

palette = 34=#00af00

palette = 35=#00af5f

palette = 36=#00af87

palette = 37=#00afaf

palette = 38=#00afd7

palette = 39=#00afff

palette = 40=#00d700

palette = 41=#00d75f

palette = 42=#00d787

palette = 43=#00d7af

palette = 44=#00d7d7

palette = 45=#00d7ff

palette = 46=#00ff00

palette = 47=#00ff5f

palette = 48=#00ff87

palette = 49=#00ffaf

palette = 50=#00ffd7

palette = 51=#00ffff

palette = 52=#5f0000

palette = 53=#5f005f

palette = 54=#5f0087

palette = 55=#5f00af

palette = 56=#5f00d7

palette = 57=#5f00ff

palette = 58=#5f5f00

palette = 59=#5f5f5f

palette = 60=#5f5f87

palette = 61=#5f5faf

palette = 62=#5f5fd7

palette = 63=#5f5fff

palette = 64=#5f8700

palette = 65=#5f875f

palette = 66=#5f8787

palette = 67=#5f87af

palette = 68=#5f87d7

palette = 69=#5f87ff

palette = 70=#5faf00

palette = 71=#5faf5f

palette = 72=#5faf87

palette = 73=#5fafaf

palette = 74=#5fafd7

palette = 75=#5fafff

palette = 76=#5fd700

palette = 77=#5fd75f

palette = 78=#5fd787

palette = 79=#5fd7af

palette = 80=#5fd7d7

palette = 81=#5fd7ff

palette = 82=#5fff00

palette = 83=#5fff5f

palette = 84=#5fff87

palette = 85=#5fffaf

palette = 86=#5fffd7

palette = 87=#5fffff

palette = 88=#870000

palette = 89=#87005f

palette = 90=#870087

palette = 91=#8700af

palette = 92=#8700d7

palette = 93=#8700ff

palette = 94=#875f00

palette = 95=#875f5f

palette = 96=#875f87

palette = 97=#875faf

palette = 98=#875fd7

palette = 99=#875fff

palette = 100=#878700

palette = 101=#87875f

palette = 102=#878787

palette = 103=#8787af

palette = 104=#8787d7

palette = 105=#8787ff

palette = 106=#87af00

palette = 107=#87af5f

palette = 108=#87af87

palette = 109=#87afaf

palette = 110=#87afd7

palette = 111=#87afff

palette = 112=#87d700

palette = 113=#87d75f

palette = 114=#87d787

palette = 115=#87d7af

palette = 116=#87d7d7

palette = 117=#87d7ff

palette = 118=#87ff00

palette = 119=#87ff5f

palette = 120=#87ff87

palette = 121=#87ffaf

palette = 122=#87ffd7

palette = 123=#87ffff

palette = 124=#af0000

palette = 125=#af005f

palette = 126=#af0087

palette = 127=#af00af

palette = 128=#af00d7

palette = 129=#af00ff

palette = 130=#af5f00

palette = 131=#af5f5f

palette = 132=#af5f87

palette = 133=#af5faf

palette = 134=#af5fd7

palette = 135=#af5fff

palette = 136=#af8700

palette = 137=#af875f

palette = 138=#af8787

palette = 139=#af87af

palette = 140=#af87d7

palette = 141=#af87ff

palette = 142=#afaf00

palette = 143=#afaf5f

palette = 144=#afaf87

palette = 145=#afafaf

palette = 146=#afafd7

palette = 147=#afafff

palette = 148=#afd700

palette = 149=#afd75f

palette = 150=#afd787

palette = 151=#afd7af

palette = 152=#afd7d7

palette = 153=#afd7ff

palette = 154=#afff00

palette = 155=#afff5f

palette = 156=#afff87

palette = 157=#afffaf

palette = 158=#afffd7

palette = 159=#afffff

palette = 160=#d70000

palette = 161=#d7005f

palette = 162=#d70087

palette = 163=#d700af

palette = 164=#d700d7

palette = 165=#d700ff

palette = 166=#d75f00

palette = 167=#d75f5f

palette = 168=#d75f87

palette = 169=#d75faf

palette = 170=#d75fd7

palette = 171=#d75fff

palette = 172=#d78700

palette = 173=#d7875f

palette = 174=#d78787

palette = 175=#d787af

palette = 176=#d787d7

palette = 177=#d787ff

palette = 178=#d7af00

palette = 179=#d7af5f

palette = 180=#d7af87

palette = 181=#d7afaf

palette = 182=#d7afd7

palette = 183=#d7afff

palette = 184=#d7d700

palette = 185=#d7d75f

palette = 186=#d7d787

palette = 187=#d7d7af

palette = 188=#d7d7d7

palette = 189=#d7d7ff

palette = 190=#d7ff00

palette = 191=#d7ff5f

palette = 192=#d7ff87

palette = 193=#d7ffaf

palette = 194=#d7ffd7

palette = 195=#d7ffff

palette = 196=#ff0000

palette = 197=#ff005f

palette = 198=#ff0087

palette = 199=#ff00af

palette = 200=#ff00d7

palette = 201=#ff00ff

palette = 202=#ff5f00

palette = 203=#ff5f5f

palette = 204=#ff5f87

palette = 205=#ff5faf

palette = 206=#ff5fd7

palette = 207=#ff5fff

palette = 208=#ff8700

palette = 209=#ff875f

palette = 210=#ff8787

palette = 211=#ff87af

palette = 212=#ff87d7

palette = 213=#ff87ff

palette = 214=#ffaf00

palette = 215=#ffaf5f

palette = 216=#ffaf87

palette = 217=#ffafaf

palette = 218=#ffafd7

palette = 219=#ffafff

palette = 220=#ffd700

palette = 221=#ffd75f

palette = 222=#ffd787

palette = 223=#ffd7af

palette = 224=#ffd7d7

palette = 225=#ffd7ff

palette = 226=#ffff00

palette = 227=#ffff5f

palette = 228=#ffff87

palette = 229=#ffffaf

palette = 230=#ffffd7

palette = 231=#ffffff

palette = 232=#080808

palette = 233=#121212

palette = 234=#1c1c1c

palette = 235=#262626

palette = 236=#303030

palette = 237=#3a3a3a

palette = 238=#444444

palette = 239=#4e4e4e

palette = 240=#585858

palette = 241=#626262

palette = 242=#6c6c6c

palette = 243=#767676

palette = 244=#808080

palette = 245=#8a8a8a

palette = 246=#949494

palette = 247=#9e9e9e

palette = 248=#a8a8a8

palette = 249=#b2b2b2

palette = 250=#bcbcbc

palette = 251=#c6c6c6

palette = 252=#d0d0d0

palette = 253=#dadada

palette = 254=#e4e4e4

palette = 255=#eeeeee

# The color of the cursor. If this is not set, a default will be chosen.

cursor-color = 

# Swap the foreground and background colors of the cell under the cursor. This

# option overrides the `cursor-color` and `cursor-text` options.

cursor-invert-fg-bg = false

# The opacity level (opposite of transparency) of the cursor. A value of 1

# is fully opaque and a value of 0 is fully transparent. A value less than 0

# or greater than 1 will be clamped to the nearest valid value. Note that a

# sufficiently small value such as 0.3 may be effectively invisible and may

# make it difficult to find the cursor.

cursor-opacity = 1

# The style of the cursor. This sets the default style. A running program can

# still request an explicit cursor style using escape sequences (such as `CSI

# q`). Shell configurations will often request specific cursor styles.

# 

# Note that shell integration will automatically set the cursor to a bar at

# a prompt, regardless of this configuration. You can disable that behavior

# by specifying `shell-integration-features = no-cursor` or disabling shell

# integration entirely.

# 

# Valid values are:

# 

#   * `block`

#   * `bar`

#   * `underline`

#   * `block_hollow`

# 

cursor-style = block

# Sets the default blinking state of the cursor. This is just the default

# state; running programs may override the cursor style using `DECSCUSR` (`CSI

# q`).

# 

# If this is not set, the cursor blinks by default. Note that this is not the

# same as a "true" value, as noted below.

# 

# If this is not set at all (`null`), then Ghostty will respect DEC Mode 12

# (AT&T cursor blink) as an alternate approach to turning blinking on/off. If

# this is set to any value other than null, DEC mode 12 will be ignored but

# `DECSCUSR` will still be respected.

# 

# Valid values are:

# 

#   * `` (blank)

#   * `true`

#   * `false`

# 

cursor-style-blink = 

# The color of the text under the cursor. If this is not set, a default will

# be chosen.

cursor-text = 

# Enables the ability to move the cursor at prompts by using `alt+click` on

# Linux and `option+click` on macOS.

# 

# This feature requires shell integration (specifically prompt marking

# via `OSC 133`) and only works in primary screen mode. Alternate screen

# applications like vim usually have their own version of this feature but

# this configuration doesn't control that.

# 

# It should be noted that this feature works by translating your desired

# position into a series of synthetic arrow key movements, so some weird

# behavior around edge cases are to be expected. This is unfortunately how

# this feature is implemented across terminals because there isn't any other

# way to implement it.

cursor-click-to-move = true

# Hide the mouse immediately when typing. The mouse becomes visible again

# when the mouse is used (button, movement, etc.). Platform-specific behavior

# may dictate other scenarios where the mouse is shown. For example on macOS,

# the mouse is shown again when a new window, tab, or split is created.

mouse-hide-while-typing = false

# Determines whether running programs can detect the shift key pressed with a

# mouse click. Typically, the shift key is used to extend mouse selection.

# 

# The default value of `false` means that the shift key is not sent with

# the mouse protocol and will extend the selection. This value can be

# conditionally overridden by the running program with the `XTSHIFTESCAPE`

# sequence.

# 

# The value `true` means that the shift key is sent with the mouse protocol

# but the running program can override this behavior with `XTSHIFTESCAPE`.

# 

# The value `never` is the same as `false` but the running program cannot

# override this behavior with `XTSHIFTESCAPE`. The value `always` is the

# same as `true` but the running program cannot override this behavior with

# `XTSHIFTESCAPE`.

# 

# If you always want shift to extend mouse selection even if the program

# requests otherwise, set this to `never`.

# 

# Valid values are:

# 

#   * `true`

#   * `false`

#   * `always`

#   * `never`

# 

mouse-shift-capture = false

# Multiplier for scrolling distance with the mouse wheel. Any value less

# than 0.01 or greater than 10,000 will be clamped to the nearest valid

# value.

# 

# A value of "1" (default) scrolls te default amount. A value of "2" scrolls

# double the default amount. A value of "0.5" scrolls half the default amount.

# Et cetera.

mouse-scroll-multiplier = 1

# The opacity level (opposite of transparency) of the background. A value of

# 1 is fully opaque and a value of 0 is fully transparent. A value less than 0

# or greater than 1 will be clamped to the nearest valid value.

# 

# On macOS, background opacity is disabled when the terminal enters native

# fullscreen. This is because the background becomes gray and it can cause

# widgets to show through which isn't generally desirable.

background-opacity = 1

# A positive value enables blurring of the background when background-opacity

# is less than 1. The value is the blur radius to apply. A value of 20

# is reasonable for a good looking blur. Higher values will cause strange

# rendering issues as well as performance issues.

# 

# This is only supported on macOS.

background-blur-radius = 0

# The opacity level (opposite of transparency) of an unfocused split.

# Unfocused splits by default are slightly faded out to make it easier to see

# which split is focused. To disable this feature, set this value to 1.

# 

# A value of 1 is fully opaque and a value of 0 is fully transparent. Because

# "0" is not useful (it makes the window look very weird), the minimum value

# is 0.15. This value still looks weird but you can at least see what's going

# on. A value outside of the range 0.15 to 1 will be clamped to the nearest

# valid value.

unfocused-split-opacity = 0.7

# The color to dim the unfocused split. Unfocused splits are dimmed by

# rendering a semi-transparent rectangle over the split. This sets the color of

# that rectangle and can be used to carefully control the dimming effect.

# 

# This will default to the background color.

unfocused-split-fill = 

# The command to run, usually a shell. If this is not an absolute path, it'll

# be looked up in the `PATH`. If this is not set, a default will be looked up

# from your system. The rules for the default lookup are:

# 

#   * `SHELL` environment variable

# 

#   * `passwd` entry (user information)

# 

# This can contain additional arguments to run the command with. If additional

# arguments are provided, the command will be executed using `/bin/sh -c`.

# Ghostty does not do any shell command parsing.

# 

# This command will be used for all new terminal surfaces, i.e. new windows,

# tabs, etc. If you want to run a command only for the first terminal surface

# created when Ghostty starts, use the `initial-command` configuration.

# 

# Ghostty supports the common `-e` flag for executing a command with

# arguments. For example, `ghostty -e fish --with --custom --args`.

# This flag sets the `initial-command` configuration, see that for more

# information.

command = 

# This is the same as "command", but only applies to the first terminal

# surface created when Ghostty starts. Subsequent terminal surfaces will use

# the `command` configuration.

# 

# After the first terminal surface is created (or closed), there is no

# way to run this initial command again automatically. As such, setting

# this at runtime works but will only affect the next terminal surface

# if it is the first one ever created.

# 

# If you're using the `ghostty` CLI there is also a shortcut to set this

# with arguments directly: you can use the `-e` flag. For example: `ghostty -e

# fish --with --custom --args`. The `-e` flag automatically forces some

# other behaviors as well:

# 

#   * `gtk-single-instance=false` - This ensures that a new instance is

#     launched and the CLI args are respected.

# 

#   * `quit-after-last-window-closed=true` - This ensures that the Ghostty

#     process will exit when the command exits. Additionally, the

#     `quit-after-last-window-closed-delay` is unset.

# 

#   * `shell-integration=detect` (if not `none`) - This prevents forcibly

#     injecting any configured shell integration into the command's

#     environment. With `-e` its highly unlikely that you're executing a

#     shell and forced shell integration is likely to cause problems

#     (i.e. by wrapping your command in a shell, setting env vars, etc.).

#     This is a safety measure to prevent unexpected behavior. If you want

#     shell integration with a `-e`-executed command, you must either

#     name your binary appopriately or source the shell integration script

#     manually.

# 

initial-command = 

# If true, keep the terminal open after the command exits. Normally, the

# terminal window closes when the running command (such as a shell) exits.

# With this true, the terminal window will stay open until any keypress is

# received.

# 

# This is primarily useful for scripts or debugging.

wait-after-command = false

# The number of milliseconds of runtime below which we consider a process exit

# to be abnormal. This is used to show an error message when the process exits

# too quickly.

# 

# On Linux, this must be paired with a non-zero exit code. On macOS, we allow

# any exit code because of the way shell processes are launched via the login

# command.

abnormal-command-exit-runtime = 250

# The size of the scrollback buffer in bytes. This also includes the active

# screen. No matter what this is set to, enough memory will always be

# allocated for the visible screen and anything leftover is the limit for

# the scrollback.

# 

# When this limit is reached, the oldest lines are removed from the

# scrollback.

# 

# Scrollback currently exists completely in memory. This means that the

# larger this value, the larger potential memory usage. Scrollback is

# allocated lazily up to this limit, so if you set this to a very large

# value, it will not immediately consume a lot of memory.

# 

# This size is per terminal surface, not for the entire application.

# 

# It is not currently possible to set an unlimited scrollback buffer.

# This is a future planned feature.

# 

# This can be changed at runtime but will only affect new terminal surfaces.

scrollback-limit = 10000000

# Match a regular expression against the terminal text and associate clicking

# it with an action. This can be used to match URLs, file paths, etc. Actions

# can be opening using the system opener (i.e. `open` or `xdg-open`) or

# executing any arbitrary binding action.

# 

# Links that are configured earlier take precedence over links that are

# configured later.

# 

# A default link that matches a URL and opens it in the system opener always

# exists. This can be disabled using `link-url`.

# 

# TODO: This can't currently be set!

# Enable URL matching. URLs are matched on hover with control (Linux) or

# super (macOS) pressed and open using the default system application for

# the linked URL.

# 

# The URL matcher is always lowest priority of any configured links (see

# `link`). If you want to customize URL matching, use `link` and disable this.

link-url = true

# Start new windows in fullscreen. This setting applies to new windows and

# does not apply to tabs, splits, etc. However, this setting will apply to all

# new windows, not just the first one.

# 

# On macOS, this setting does not work if window-decoration is set to

# "false", because native fullscreen on macOS requires window decorations

# to be set.

fullscreen = false

# The title Ghostty will use for the window. This will force the title of the

# window to be this title at all times and Ghostty will ignore any set title

# escape sequences programs (such as Neovim) may send.

# 

# If you want a blank title, set this to one or more spaces by quoting

# the value. For example, `title = " "`. This effectively hides the title.

# This is necessary because setting a blank value resets the title to the

# default value of the running program.

# 

# This configuration can be reloaded at runtime. If it is set, the title

# will update for all windows. If it is unset, the next title change escape

# sequence will be honored but previous changes will not retroactively

# be set. This latter case may require you restart programs such as neovim

# to get the new title.

title = 

# The setting that will change the application class value.

# 

# This controls the class field of the `WM_CLASS` X11 property (when running

# under X11), and the Wayland application ID (when running under Wayland).

# 

# Note that changing this value between invocations will create new, separate

# instances, of Ghostty when running with `gtk-single-instance=true`. See that

# option for more details.

# 

# The class name must follow the requirements defined [in the GTK

# documentation](https://docs.gtk.org/gio/type_func.Application.id_is_valid.html).

# 

# The default is `com.mitchellh.ghostty`.

# 

# This only affects GTK builds.

class = 

# This controls the instance name field of the `WM_CLASS` X11 property when

# running under X11. It has no effect otherwise.

# 

# The default is `ghostty`.

# 

# This only affects GTK builds.

x11-instance-name = 

# The directory to change to after starting the command.

# 

# This setting is secondary to the `window-inherit-working-directory`

# setting. If a previous Ghostty terminal exists in the same process,

# `window-inherit-working-directory` will take precedence. Otherwise, this

# setting will be used. Typically, this setting is used only for the first

# window.

# 

# The default is `inherit` except in special scenarios listed next. On macOS,

# if Ghostty can detect it is launched from launchd (double-clicked) or

# `open`, then it defaults to `home`. On Linux with GTK, if Ghostty can detect

# it was launched from a desktop launcher, then it defaults to `home`.

# 

# The value of this must be an absolute value or one of the special values

# below:

# 

#   * `home` - The home directory of the executing user.

# 

#   * `inherit` - The working directory of the launching process.

working-directory = 

# Key bindings. The format is `trigger=action`. Duplicate triggers will

# overwrite previously set values. The list of actions is available in

# the documentation or using the `ghostty +list-actions` command.

# 

# Trigger: `+`-separated list of keys and modifiers. Example: `ctrl+a`,

# `ctrl+shift+b`, `up`. Some notes:

# 

#   * modifiers cannot repeat, `ctrl+ctrl+a` is invalid.

# 

#   * modifiers and keys can be in any order, `shift+a+ctrl` is *weird*,

#     but valid.

# 

#   * only a single key input is allowed, `ctrl+a+b` is invalid.

# 

#   * the key input can be prefixed with `physical:` to specify a

#     physical key mapping rather than a logical one. A physical key

#     mapping responds to the hardware keycode and not the keycode

#     translated by any system keyboard layouts. Example: "ctrl+physical:a"

# 

# Valid modifiers are `shift`, `ctrl` (alias: `control`), `alt` (alias: `opt`,

# `option`), and `super` (alias: `cmd`, `command`). You may use the modifier

# or the alias. When debugging keybinds, the non-aliased modifier will always

# be used in output.

# 

# Note: The fn or "globe" key on keyboards are not supported as a

# modifier. This is a limitation of the operating systems and GUI toolkits

# that Ghostty uses.

# 

# You may also specify multiple triggers separated by `>` to require a

# sequence of triggers to activate the action. For example,

# `ctrl+a>n=new_window` will only trigger the `new_window` action if the

# user presses `ctrl+a` followed separately by `n`. In other software, this

# is sometimes called a leader key, a key chord, a key table, etc. There

# is no hardcoded limit on the number of parts in a sequence.

# 

# Warning: If you define a sequence as a CLI argument to `ghostty`,

# you probably have to quote the keybind since `>` is a special character

# in most shells. Example: ghostty --keybind='ctrl+a>n=new_window'

# 

# A trigger sequence has some special handling:

# 

#   * Ghostty will wait an indefinite amount of time for the next key in

#     the sequence. There is no way to specify a timeout. The only way to

#     force the output of a prefix key is to assign another keybind to

#     specifically output that key (i.e. `ctrl+a>ctrl+a=text:foo`) or

#     press an unbound key which will send both keys to the program.

# 

#   * If a prefix in a sequence is previously bound, the sequence will

#     override the previous binding. For example, if `ctrl+a` is bound to

#     `new_window` and `ctrl+a>n` is bound to `new_tab`, pressing `ctrl+a`

#     will do nothing.

# 

#   * Adding to the above, if a previously bound sequence prefix is

#     used in a new, non-sequence binding, the entire previously bound

#     sequence will be unbound. For example, if you bind `ctrl+a>n` and

#     `ctrl+a>t`, and then bind `ctrl+a` directly, both `ctrl+a>n` and

#     `ctrl+a>t` will become unbound.

# 

#   * Trigger sequences are not allowed for `global:` or `all:`-prefixed

#     triggers. This is a limitation we could remove in the future.

# 

# Action is the action to take when the trigger is satisfied. It takes the

# format `action` or `action:param`. The latter form is only valid if the

# action requires a parameter.

# 

#   * `ignore` - Do nothing, ignore the key input. This can be used to

#     black hole certain inputs to have no effect.

# 

#   * `unbind` - Remove the binding. This makes it so the previous action

#     is removed, and the key will be sent through to the child command

#     if it is printable.

# 

#   * `csi:text` - Send a CSI sequence. i.e. `csi:A` sends "cursor up".

# 

#   * `esc:text` - Send an escape sequence. i.e. `esc:d` deletes to the

#     end of the word to the right.

# 

#   * `text:text` - Send a string. Uses Zig string literal syntax.

#     i.e. `text:\x15` sends Ctrl-U.

# 

#   * All other actions can be found in the documentation or by using the

#     `ghostty +list-actions` command.

# 

# Some notes for the action:

# 

#   * The parameter is taken as-is after the `:`. Double quotes or

#     other mechanisms are included and NOT parsed. If you want to

#     send a string value that includes spaces, wrap the entire

#     trigger/action in double quotes. Example: `--keybind="up=csi:A B"`

# 

# There are some additional special values that can be specified for

# keybind:

# 

#   * `keybind=clear` will clear all set keybindings. Warning: this

#     removes ALL keybindings up to this point, including the default

#     keybindings.

# 

# The keybind trigger can be prefixed with some special values to change

# the behavior of the keybind. These are:

# 

#   * `all:` - Make the keybind apply to all terminal surfaces. By default,

#     keybinds only apply to the focused terminal surface. If this is true,

#     then the keybind will be sent to all terminal surfaces. This only

#     applies to actions that are surface-specific. For actions that

#     are already global (i.e. `quit`), this prefix has no effect.

# 

#   * `global:` - Make the keybind global. By default, keybinds only work

#     within Ghostty and under the right conditions (application focused,

#     sometimes terminal focused, etc.). If you want a keybind to work

#     globally across your system (i.e. even when Ghostty is not focused),

#     specify this prefix. This prefix implies `all:`. Note: this does not

#     work in all environments; see the additional notes below for more

#     information.

# 

#   * `unconsumed:` - Do not consume the input. By default, a keybind

#     will consume the input, meaning that the associated encoding (if

#     any) will not be sent to the running program in the terminal. If

#     you wish to send the encoded value to the program, specify the

#     `unconsumed:` prefix before the entire keybind. For example:

#     `unconsumed:ctrl+a=reload_config`. `global:` and `all:`-prefixed

#     keybinds will always consume the input regardless of this setting.

#     Since they are not associated with a specific terminal surface,

#     they're never encoded.

# 

# Keybind triggers are not unique per prefix combination. For example,

# `ctrl+a` and `global:ctrl+a` are not two separate keybinds. The keybind

# set later will overwrite the keybind set earlier. In this case, the

# `global:` keybind will be used.

# 

# Multiple prefixes can be specified. For example,

# `global:unconsumed:ctrl+a=reload_config` will make the keybind global

# and not consume the input to reload the config.

# 

# Note: `global:` is only supported on macOS. On macOS,

# this feature requires accessibility permissions to be granted to Ghostty.

# When a `global:` keybind is specified and Ghostty is launched or reloaded,

# Ghostty will attempt to request these permissions. If the permissions are

# not granted, the keybind will not work. On macOS, you can find these

# permissions in System Preferences -> Privacy & Security -> Accessibility.

keybind = super+page_up=scroll_page_up

keybind = super+ctrl+equal=equalize_splits

keybind = super+physical:four=goto_tab:4

keybind = super+shift+down=jump_to_prompt:1

keybind = super+shift+w=close_window

keybind = super+shift+left_bracket=previous_tab

keybind = super+alt+i=inspector:toggle

keybind = super+w=close_surface

keybind = super+physical:eight=goto_tab:8

keybind = super+alt+right=goto_split:right

keybind = shift+up=adjust_selection:up

keybind = super+down=jump_to_prompt:1

keybind = super+enter=toggle_fullscreen

keybind = super+t=new_tab

keybind = super+c=copy_to_clipboard

keybind = super+shift+right_bracket=next_tab

keybind = super+physical:one=goto_tab:1

keybind = shift+left=adjust_selection:left

keybind = super+equal=increase_font_size:1

keybind = shift+page_up=adjust_selection:page_up

keybind = super+physical:three=goto_tab:3

keybind = super+physical:zero=last_tab

keybind = super+right=text:\x05

keybind = super+d=new_split:right

keybind = super+ctrl+down=resize_split:down,10

keybind = shift+end=adjust_selection:end

keybind = super+plus=increase_font_size:1

keybind = super+q=quit

keybind = super+home=scroll_to_top

keybind = super+ctrl+left=resize_split:left,10

keybind = alt+left=esc:b

keybind = super+ctrl+up=resize_split:up,10

keybind = super+left=text:\x01

keybind = super+shift+up=jump_to_prompt:-1

keybind = shift+right=adjust_selection:right

keybind = super+comma=open_config

keybind = super+shift+comma=reload_config

keybind = super+minus=decrease_font_size:1

keybind = shift+page_down=adjust_selection:page_down

keybind = ctrl+tab=next_tab

keybind = super+a=select_all

keybind = alt+right=esc:f

keybind = super+shift+enter=toggle_split_zoom

keybind = super+alt+down=goto_split:bottom

keybind = super+ctrl+f=toggle_fullscreen

keybind = super+ctrl+right=resize_split:right,10

keybind = super+alt+shift+j=write_scrollback_file:open

keybind = shift+down=adjust_selection:down

keybind = ctrl+shift+tab=previous_tab

keybind = super+n=new_window

keybind = super+alt+left=goto_split:left

keybind = super+page_down=scroll_page_down

keybind = super+alt+shift+w=close_all_windows

keybind = super+alt+up=goto_split:top

keybind = super+left_bracket=goto_split:previous

keybind = super+physical:nine=goto_tab:9

keybind = super+right_bracket=goto_split:next

keybind = super+end=scroll_to_bottom

keybind = super+shift+j=write_scrollback_file:paste

keybind = super+shift+d=new_split:down

keybind = super+zero=reset_font_size

keybind = super+physical:five=goto_tab:5

keybind = shift+home=adjust_selection:home

keybind = super+physical:seven=goto_tab:7

keybind = super+up=jump_to_prompt:-1

keybind = super+k=clear_screen

keybind = super+physical:two=goto_tab:2

keybind = super+physical:six=goto_tab:6

keybind = super+v=paste_from_clipboard

# Horizontal window padding. This applies padding between the terminal cells

# and the left and right window borders. The value is in points, meaning that

# it will be scaled appropriately for screen DPI.

# 

# If this value is set too large, the screen will render nothing, because the

# grid will be completely squished by the padding. It is up to you as the user

# to pick a reasonable value. If you pick an unreasonable value, a warning

# will appear in the logs.

# 

# Changing this configuration at runtime will only affect new terminals, i.e.

# new windows, tabs, etc.

# 

# To set a different left and right padding, specify two numerical values

# separated by a comma. For example, `window-padding-x = 2,4` will set the

# left padding to 2 and the right padding to 4. If you want to set both

# paddings to the same value, you can use a single value. For example,

# `window-padding-x = 2` will set both paddings to 2.

window-padding-x = 6

# Vertical window padding. This applies padding between the terminal cells and

# the top and bottom window borders. The value is in points, meaning that it

# will be scaled appropriately for screen DPI.

# 

# If this value is set too large, the screen will render nothing, because the

# grid will be completely squished by the padding. It is up to you as the user

# to pick a reasonable value. If you pick an unreasonable value, a warning

# will appear in the logs.

# 

# Changing this configuration at runtime will only affect new terminals,

# i.e. new windows, tabs, etc.

# 

# To set a different top and bottom padding, specify two numerical values

# separated by a comma. For example, `window-padding-y = 2,4` will set the

# top padding to 2 and the bottom padding to 4. If you want to set both

# paddings to the same value, you can use a single value. For example,

# `window-padding-y = 2` will set both paddings to 2.

window-padding-y = 2

# The viewport dimensions are usually not perfectly divisible by the cell

# size. In this case, some extra padding on the end of a column and the bottom

# of the final row may exist. If this is `true`, then this extra padding

# is automatically balanced between all four edges to minimize imbalance on

# one side. If this is `false`, the top left grid cell will always hug the

# edge with zero padding other than what may be specified with the other

# `window-padding` options.

# 

# If other `window-padding` fields are set and this is `true`, this will still

# apply. The other padding is applied first and may affect how many grid cells

# actually exist, and this is applied last in order to balance the padding

# given a certain viewport size and grid cell size.

window-padding-balance = false

# The color of the padding area of the window. Valid values are:

# 

# * `background` - The background color specified in `background`.

# * `extend` - Extend the background color of the nearest grid cell.

# * `extend-always` - Same as "extend" but always extends without applying

#   any of the heuristics that disable extending noted below.

# 

# The "extend" value will be disabled in certain scenarios. On primary

# screen applications (i.e. not something like Neovim), the color will not

# be extended vertically if any of the following are true:

# 

# * The nearest row has any cells that have the default background color.

#   The thinking is that in this case, the default background color looks

#   fine as a padding color.

# * The nearest row is a prompt row (requires shell integration). The

#   thinking here is that prompts often contain powerline glyphs that

#   do not look good extended.

# * The nearest row contains a perfect fit powerline character. These

#   don't look good extended.

# 

window-padding-color = background

# Synchronize rendering with the screen refresh rate. If true, this will

# minimize tearing and align redraws with the screen but may cause input

# latency. If false, this will maximize redraw frequency but may cause tearing,

# and under heavy load may use more CPU and power.

# 

# This defaults to true because out-of-sync rendering on macOS can

# cause kernel panics (macOS 14.4+) and performance issues for external

# displays over some hardware such as DisplayLink. If you want to minimize

# input latency, set this to false with the known aforementioned risks.

# 

# Changing this value at runtime will only affect new terminals.

#